TOP 12 Best Z Probe For 3d Printers - Buse Korkmaz

Best Z Probe For 3d Printers

There are many different 3d printers on the market, but some of the most popular ones are the Makerbot Replicator 2, the 3D printer company Stratasys, and the 3D printer company 3D Systems.

Bestseller No. 1
3D Printer Accessories Automatic Leveling Module Film Pressure Probe Type Auto-Leveling Sensor for V6 MK8 Makerbot Nozzles(for Makerbot Nozzle)
  • Easy to install, can be applied to different types of 3 Dimensional printers. Plug and play, the default trigger distance is 0.1mm
  • High precision, leveling adjust accuracy can be up to +/- 0.05mm
  • The average service life of the module is more than 500,000 times
  • Compatible with almost all the 3 Dimensional printer motherboards in the current market
  • Good anti-interference ability, will not be affected by the platform material, ambient light, ambient temperature and humidity, etc.
Bestseller No. 2
Kossel Delta Z axis 3D Printer High Precision Z-Probe Auto Bed Leveling Sensor kit 3D Touch Sensor for V6 nozzles and MK8 nozzles Hotend
  • IMPORTANT! Please make sure that the nozzle and bed is cool down to room temperature before mount the sensor.The sensor will be destoryed if the nozzle temperature is too high
  • Can be used with any printing surface including Printbite,PEI,Buildtak,Glass,Aluminium,FR4.
  • Uses a standard endstop connector;Voltage comparator module can provide repeatable and stable single output
  • Very easy to configure in your firmware,No X or Y offsets,your nozzle is the tool head,so use the nozzle to probe
  • This product is an auto bed leveling kit using membrane switch technology.Nozzle contact is a direct measurement,the nozzle is the 'sharp end of the tool'.Since there are no x and y offsets(and very minimal z-offset)the whole of the printable area of the bed can be probed.It is light weight and removable will not add any mass to your printhead.The firmware setting is simplest of all the autobed leveling method.
Bestseller No. 3
Twidec/M12 4mm Sensing Work Voltage 5V DC NPN NO (Normally Open) 3D Printer Cylinder inductive Proximity Sensor Switch Special LJ12A3-4-Z/BX-5V
  • Product Name:Inductive Proximity Switch; Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type
  • Supply Voltage : DC 5V;Current Output : 300mA;Response Frequency : 150Hz;Detect Object : Iron
  • Model: LJ12A3-4-Z/BX-5V;Theory : Inductive Sensor;Output Type: NPN NO;Diameter of Column Sensor: 12mm;Detecting Distance : 4mm
  • Total Size: 5 x 1.5cm/2'' x 0.6'' (L*W); Cable Length: 1.2m/47'';Net Weight : 50g
  • External Material : Plastic, Alloy;Package Content : 1 x Inductive Proximity Switch
Bestseller No. 4
2pcs DC 5V NPN NO M12 4mm Sensor LJ12A3-4-Z/BX Inductive Proximity Sensor Switch for 3D Printer CNC Z Probe auto Bed Leveling
  • It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.
  • it can be applied for 3D printer auto leveling, When proximity switch is close to some target object, it will send out control signal.
  • As it is capacitive type proximity switch, its detecting object target is not limited to only conductor, but also liquid and even powder things, like plastic, water, glass, oil, etc.
  • It's widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial ect.
  • 3 Wire Polarity: NPN Detection; DC 5V; Brown → +5V, Blue → GND, Black → Signal (Zmin)
Bestseller No. 5
Precision Piezo Z-Probe Kit Piezo-Electric Hotend Z Probe Underbed Piezo Sensor for 3D Printers Revolutionary Auto Bed Leveling Sensor
  • This product is a Z-probe sensor kit using piezo electric bimorphs technology to provide precision auto bed levering on 3D printers.
  • Of all the other sensing technologies being used in 3D printing we believe this one is the best at present.Nozzle contact is a direct measurement,the nozzle is the 'sharp end of the tool'.Since there are no x and y offsets(and very minimal z-offset) the whole of the printable area of the bed can be probed.
  • It is permanently mounted so no servos to setup,and no issues with repeatability between probings.Any type of tilt in the carriage or effector does not result in probing errors being fed into computations for bed levelling or calibration.
  • Very precise to 0.01mm accuracy(hotend mount); Very repeatable-standard deviation in testing 0.007mm; Can be used with any printing surface including Printbite,PEI,Buildtak,Glass,Aluminium,FR4. Uses a standard endstop connector ; Is permanently fixed,no servos,no deploying required;Easy to configure in your firmware;No X or Y offsets,your nozzle is the tool head,so use the nozzle to probe;Replaces inductive probes,IR probes,Capacitative probes,FSR's,servo probes
  • Illuminates on probing OR you can specify a solid colour unit both units have LED's front and back.
Bestseller No. 6
3Pcs LJ18A3-8-Z/BX NPN NO Inductive Proximity Sensor Switch Detector 8mm Detecting Distance DC 6-36V M18 Approach Switch 300mA 3 Wire LJ18A3-8-Z/BX for 3D Printer Probe Bed Leveling, MCU Board
  • LJ18A3-8-Z/BX 5V inductive proximity switch; wire type : DC 3 wire type; switch appearance type : cylinder type
  • Inductive proximity switch lj18a3-8-z/bx theory: Inductive sensor; output type: NPN NO(Normal Open); diameter of head : 18mm; detecting distance : 8mm ± 10%; Set distance: 0-7mm
  • 8mm sensor inductive proximity supply voltage : DC 6-36V; current output : 300mA; detect object : Iron; thread size: 18mm
  • Sensitive detection: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal
  • LJ18A3-8-Z/BX application: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is widely used in mechanical automation, 3D printer probe bed leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc
Bestseller No. 7
UMLIFE 3PCS 8mm Detecting Distance Approach Sensor Inductive Proximity Switch NPN NO 300mA 3-Wire DC 6-36V LJ18A3-8-Z/BX for 3D Printer Probe Bed Leveling,MCU Board
  • ✹✹Detecting Distance: 8mm; Supply Voltage: DC 6-36V; Current Output : 300mA; Detect Object : Iron; Thread Size: 18mm.
  • ✹✹ Operating Temperature : -25C to +55C (Non-freezing Condition);Size : 7 x 3cm/2.8'' x 1.2'' (L*Max. Dia);Cable Length : 103cm / 40.55"
  • ✹✹Item Name : Inductive Proximity Switch; Model : LJ18A3-8-Z/BX; Package Qty: 3 Piece Switch
  • ✹✹ Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type; Material : Plastic, Alloy;
  • ✹✹Brass nickel-plated shell, not easy to rust and fade. With 120CM high-quality copper wire, strong and durable, and excellent electrical conductivity.
Bestseller No. 8
uxcell 25mm Capacitance Proximity Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire LJC30A3-H-Z/BX for 3D Printer Probe Bed Leveling,MCU Board
  • 【Specification】: Detecting Distance: 25mm; Supply Voltage: DC 6-36V; Current Output : 300mA; Detect Object : Iron; Thread Size: 30mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: NPN NO(Nomal Open).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 200CM copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.
Bestseller No. 9
uxcell 1mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 100mA 3-Wire LJ8A3-1-Z/BX for 3D Printer Probe Bed Leveling,MCU Board
  • 【Specification】: Detecting Distance: 1mm; Supply Voltage: DC 6-36V; Current Output : 100mA; Detect Object : Iron; Thread Size: 8mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: NPN NO(Nomal Open).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.
Bestseller No. 10
uxcell 4mm Detecting Distance Inductive Proximity Switch PNP NO DC 6-36V 200mA 3-Wire LJ12A3-4-Z/BY for 3D Printer Probe Bed Leveling,MCU Board
  • 【Specification】: Detecting Distance: 4mm; Supply Voltage: DC 6-36V; Current Output : 200mA; Detect Object : Iron; Thread Size: 12mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: PNP NO(Normal Open).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.
SaleBestseller No. 11
MYNT3D Super 3D Pen, 1.75mm ABS and PLA Compatible 3D Printing Pen
  • Turn your ordinary drawings into 3D works of art
  • Stepless speed slider lets you regulate flow for optimal control of material while you're drawing
  • New: ultrasonic sealed nozzle is nearly clog-proof and provides market leading durability
  • The Super 3D Printing Pen is great for kids, artists and engineers of all ages
  • Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty
Bestseller No. 12
Automatic Bed Leveling Sensor 3D Touch Auto Leveling for 3D Printers CR-10/Ender 3/ Pro/CR-10S/S4/S5 KP3S KP5
  • Automatic Bed Leveling Sensor is Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
  • The 3D Touch auto is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
  • The main functions of ABL and controls of Auto bed Leveling are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D touch can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, Automatic Bed Leveling Sensor can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.
  • NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate.
Bestseller No. 13
FYSETC 3D Printer Project Parts Vorn2.4 Auto Bed Leveling Sensor Omrn TL-Q5MC2-Z Proximity Switch 3 Wire DC10-30V Shield Type Inductive Probe Soldered with Cables Compatible with Vorn V2.2/ V2.4
  • It is a must part to build your own Vorn 2.2/2.4 printer; 100% New Original Brand Omrn TL-Q5MC2-Z, High quality.
  • Function:The Proximity auto leveling sensor makes machine leveling printing easier.
  • Parameter: Working Voltage DC 10-30V, 2M long cable including 3 Wire.
  • Feature:Smart, Lightweight, High-precision.
  • Fits:It can work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Bestseller No. 14
Official Creality CR Touch Auto Bed Leveling Sensor Kit with 32 Bit V4.2.2 / V4.2.7 Mainboard and Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Pro/Ender 5/CR-10 3D Printer
  • Creality Official Product: CR Touch auto bed leveling sensor fulfilled simple structure and high precision.Performs multi-point detection on the printing platform and records the height of each detection point.Stable quality, long service life, and can be reused more than 100,000 times.
  • Widely Application: The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer. (Note: Only compatible with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers).
  • Durable & Strong compatibility: Compatible with PEI / sticker/ glass / metal bed.Creality upgraded CR Touch 3d printer auto bed leveling sensor Kit works perfectly with any surface, especially the design of metal push pin allows for longer service life.
  • Easy Installation: 3 different kinds of mounting brackets allows for installation on multiple 3d printers. The CR-Touch sensor is simple in structure, convenient for printing when connected. Automatic compensation of Z-axis so as to stable print.
  • After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Bestseller No. 15
Filament Friday E-Leveler 3D Printer Electronic Bed Leveling Tool
  • FILAMENT FRIDAY E-LEVELER: This is the original Filament Friday E-Leveler that is designed, created, and featured by Chuck Hellebuyck on the Filament Friday YouTube channel
  • PERFECTLY LEVEL BED: This tool will give you visual feedback to perfectly adjust the bed level on your 3D printer
  • BATTERY INCLUDED: A CR2032 coin cell battery is included so that your Filament Friday E-Leveler is ready to use right out of the box
  • FULLY ASSEMBLED: The Filament Friday E-Leveler is available in an assembled version