TOP 12 Best Monoblock Car Amplifier - Buse Korkmaz

Best Monoblock Car Amplifier

A monoblock car amplifier is a type of amplifier that consists of two or more loudspeakers that are connected in a single unit. This type of amplifier is used to improve the sound quality of audio signals.

Bestseller No. 1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
SaleBestseller No. 2
Blaupunkt 1500W 1-Channel, Monoblock Amplifier
  • 1500W Maximum Power Monoblock Amplifier
  • Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
  • Compactly built so this amplifier can fit perfectly into any trunk
Bestseller No. 3
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control
  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
SaleBestseller No. 4
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
Bestseller No. 5
Lanzar B52 Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG137) , BLACK
  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.
SaleBestseller No. 6
Planet Audio PL2000.1M Monoblock Car Amplifier - 2000 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Subwoofers
  • 2000 W MAX Power @ 2 Ohm x 1 Channel
  • 1000 W MAX Power @ 4 Ohm x 1 Channel
  • High and Low Level Inputs
  • Variable Low Pass Crossover, Variable Bass Boost
  • Remote Subwoofer Control
Bestseller No. 7
Planet Audio TR1500.1M Monoblock Car Amplifier - 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Subwoofers
  • 1500 w Max power x 1, 1125 w x 1 RMS @ 2 ohm, 563 w x 1 RMS @ 4 ohm Monoblock class a/b, MOSFET power supply High and low level inputs Variable low Pass Crossover, switchable bass Boost
Bestseller No. 8
Audiobank Monoblock 8000 WATTS Amp Class D 1ohm Car Audio Stereo Amplifier Remote Turn On/Off Circuit/Heavy-Duty Aluminium Alloy Heatsink Power and Protection Indicator P8001
  • 1 Ohm Stable Operation & Soft Turn On Circuit
  • Thermal and Speaker Short Protection Circuitry
  • Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
  • Remote Turn-On / Turn-Off Circuit
  • LED Power and Protection Indicators
Bestseller No. 9
Audiobank Audio System P5000.1 Monoblock Car Amplifier - 5000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control, Subwoofer Amplifier
  • 2 Ohm Stable Operation & Soft Turn On Circuit
  • Thermal and Speaker Short Protection Circuitry
  • Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
  • Remote Turn-On / Turn-Off Circuit1
  • LED Power and Protection Indicators
SaleBestseller No. 10
Planet Audio PL3000.1D Pulse Series Car Audio Amplifier – 3000 High Output, Monoblock, Class D, 1 Ohm Stable, Low Level Inputs, Low Pass Crossover, Mosfet Power Supply, Hook Up To Stereo and Subwoofer
  • Power - 3000 Max x 1 @1-Ohm, 1500 Max x 1 @2-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Planet Audio provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Bestseller No. 11
BOSS Audio Systems R2000M Monoblock Car Amplifier - 2000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers
  • Power - 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Bestseller No. 12
Planet Audio PL1500.1M Monoblock Car Amplifier - 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply
  • Power - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
SaleBestseller No. 13
Sound Storm Laboratories EV1500M Evolution Series Car Audio Amplifier - 1500 High Output, Monoblock, Class A/B, 2 Ohm Stable, High/Low Level Inputs, Low Pass Crossover, Hook Up To Stereo and Subwoofer
  • Power - 1500 Max x 1 @ 2 Ohms, 750 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Sound Storm Laboratories provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
Bestseller No. 14
Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote
  • Blaupunkt 1500 Watt Monoblock Amplifier
  • Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
  • Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
  • Total Harmonic Distortion: <0.05% / RCA Input: 2-channel / Fuse: 30A x 1
  • Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct
Bestseller No. 15
Audiobank P6001 Monoblock 6000 WATTS Amp Class D 1OHM Car Audio Stereo Amplifier with Remote Turn On/Off Circuit/Heavy-Duty Aluminium Alloy Heatsink Power and Protection Indicator
  • 1 Ohm Stable Operation & Soft Turn On Circuit
  • Thermal and Speaker Short Protection Circuitry
  • Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
  • Remote Turn-On / Turn-Off Circuit
  • LED Power and Protection Indicators