TOP 12 Best Amplifier Kit For Boss R1100m Riot Amp - Buse Korkmaz

Best Amplifier Kit For Boss R1100m Riot Amp

This is aBoss R1100M Riot Amplifier Kit. This amplifier kit includes the amplifier, power supply, cables, and a remote control.

SaleBestseller No. 1
BOSS Audio Systems R1100MK Riot 1100-Watt Monoblock MOSFET Class A/B Car Audio High Power Amplifier with Remote and 8-Gauge Installation Wiring Kit
  • 1100-WATT POWER AMPLIFIER: Peak power of 1100 watts, RMS power of 825 watts; Max power at 4 ohms: 550 watts x 1; RMS power at 4 ohms: 413 watts x 1; Max power at 2 ohms: 1100 watts x 1; RMS power at 2 ohms: 825 watts x 1
  • MONOBLOCK CLASS A/B: Amp topology: Monoblock, class A/B; Power supply type: MOSFET; Channel configuration: 1-channel
  • HI/LOW LEVEL INPUTS: Subwoofer level control and high and low level inputs; Thermal, overload, and short protection; RCA Inputs: 2-channel
  • AMPLIFIER SPECIFICATIONS: Includes bass remote control; Switchable Bass Boost, Variable Low Pass Crossover; Bass boost: Switchable or 18 dB; Low Pass Filter: 35 Hz to 160 Hz; ; T.H.D: 0.01%; Frequency response: 9 Hz-50 kHz ±1 dB; Impedance: 2 to 8 ohms; S/N Ratio (A-Weighted): 102 dB; Dimensions (L x W x H): 9.125 x 10.4375 x 2.25 inches; Weight: 6 pounds; Warranty: 6-year warranty
  • INSTALLATION WIRING KIT: 20-foot 8-gauge red power cable; 3-foot 8-gauge black ground cable; Competition, high-quality fuse holder; 16-foot 18-gauge blue turn-on wire; 20-foot high-performance RCA interconnect; 30-foot speaker wire; 6-foot split loom tubing; 20, 4-inch wire ties; 3 rubber grommets; Number 10 ring terminal; 5/16-inch ring terminal; 1/4-inch ring terminal; Warranty: 2-year warranty
SaleBestseller No. 2
BOSS Audio Systems KIT2 8 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power To Your Radio, Subwoofers and Speakers
  • 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
  • 3 Foot - 8 Gauge Black Ground Cable
  • 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
  • 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
  • (20) 4" Wire Ties, (3) Rubber Grommets
SaleBestseller No. 3
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 4
BOSS Audio Systems 4BK 4 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers
  • 20 ft. 4 GA Red Power Cable, 3 ft. 4 GA Black Ground Cable
  • 16 ft. 18 GA Blue Remote Turn-On Wire,17 ft. High Performance RCA Interconnect
  • 30 ft. Speaker Wire, High-Quality AGU Fuse Holder, Gold-Plated AGU Fuse (60A)
  • 6 ft. Split Loom Tubing, (20) 4" Wire Ties, (2) Screws
  • (4) Rubber Grommets, (2) Butt Splice Wire Connectors
Bestseller No. 5
BOSS Audio Systems EK0 0 Gauge Amp Installation Wiring Kit - A Car Amplifier Wiring Kit Makes Wire Connections and Brings Power to Your Radio, Subwoofers and Speakers
  • 17 ft. 0 GA Matte Red Power Cable, High-Quality ANL Fuse Holder
  • Nickel Plated ANL Fuse (200A)
  • 3 ft. 0 GA Matte White Ground Cable
  • 18 ft. 18 GA Blue Turn-On Wire
  • 17 ft. 16 GA Matte Black Speaker Wire
Bestseller No. 6
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
SaleBestseller No. 7
BOSS Audio Systems AR1500MK Car Amplifier and 8 Gauge Wiring Kit - 1500 Watts Max Power, 2/4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
  • Wiring Installation Kit includes: 30 ft. speaker wire, 20 ft. 8 ga red power cable, 16 ft. 18 ga blue turn-on wire, 3 ft. 8 ga Black ground cable, competition quality fuse holder with agu fuse
  • WIRING INSTALLATION KIT CONTINUED: 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
  • Amplifier power: 1500 watts Max X 1 @2-ohms, 750 watts Max X 1 @4-ohms
  • Class A/B topology: class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet power supply: a MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
Bestseller No. 8
New BOSS Audio R1004 400 Watt 4 Channel Car Power Amplifier Mosfet+8 Ga Amp Kit
  • 400-WATT POWER: 400 Watt High Output 4 Channel Amplifier; Max Power @ 2 Ohms: 100 Watts x 4; RMS Power @ 4 Ohms: 38 Watts x 4
  • 4 CHANNEL CLASS A/B: Number of Output Channels: 4; Class A/B circuit design run cooler and more efficiently with low distortion and high reliability
  • HI/LOW INPUTS: High and Low Level Inputs; Thermal Overload & Speaker's Short Protection
  • AMPLIFIER SPECIFICATIONS: Impedance: 2 Ohm Stable; Variable Bass Boost; Frequency Response: 12 Hz to 22 kHz ±1 dB; THD: 0.05%; Signal to Noise Ratio: >95 dB; Weight: 3.6 pounds; Dimensions (L x W X H): 7.75 x 9 x 2 inches; 1 Year Manufacturer Warranty
  • 8-GAUGE INSTALLATION WIRING KIT: Includes 20 foot 8 gauge red power cable, 3 foot 8 gauge black ground cable, and 30 foot speaker wire; 20, 4 inch wire ties, 0.25 inch gold plated ring terminal, Number 10 gold plated ring terminal, 0.31 inch gold plated ring terminal, Competition high quality fuse holder, 16 foot 18 gauge blue turn on wire, 20 foot high performance RCA interconnect, 3 rubber grommets
Bestseller No. 9
4 Gauge Audio Amplifier Installation Wiring Systems KIT,Make Connections and Brings Power to Your Radio,Subwoofers and Speakers
  • 17FT 4 Gauge GA red power cable;1.6FT 4 Gauge GA black ground cable;17FT 16 Gauge blue remote turn-on wire;17FT 16 Gauge speaker wire;17FT High Performance RCA Interconnect Cable;3.3FT Split Loom Tubing.
  • Low noise and distortion, this amplifier runs quietly and efficiently.
  • With a Gold Plated AGU In-line Fuse( maximum current:60A) Holder to protect the audio system from damage by the overload current.
  • Great product for the money, All wires are plenty long for your installation needs and Rubber couplings included.
  • Very easy to install this Audio System Speaker Kit,Top quality and construction of material,Clean package neatly packed, good strong rubberized sleeves for the wires.
Bestseller No. 10
Skar Audio 8 Gauge CCA Complete Amplifier Installation Wiring Kit, SKAR8MANL-CCA
  • 8 Gauge CCA Complete Amplifier Wiring Installation Kit
  • Great for Installing Systems up to 600 Watts - Includes 2-channel RCA Interconnect Cable
  • 17 Ft - 8 Gauge CCA Matte Blue Max-flex Power Cable
  • 3 Ft - 8 Gauge CCA Matte Brown Max-flex Ground Cable
  • In-line Mini-ANL Fuse Holder and 60 Amp Mini-ANL Fuse Included
SaleBestseller No. 11
Stetsom Vulcan 3000 2 Ohms Mono Car Amplifier, 3000.1 3K Watts RMS, 2Ω Stable Car Audio, HD Sound Quality, Crossover & Bass Boost, Car Stereo Speaker Subwoofer MD, Smart Coolers
  • Stetsom's Latest Models - The Vulcan Line
  • Cutting Edge Technology and Optimized Design
  • Full Range with a Powerful Bass
  • Cossovers: High Pass and Low Pass
  • Boost Feature: BASS Booster, BASS Frequency control 30-70Hz, Mid Bass Boost, Mid High Boost
Bestseller No. 12
SoundBox ECK4v2, 4 Gauge Amp Kit - Complete Amplifier Install Wiring - 2500W
  • Complete 4 Gauge Amplifier Install Kit
  • New and Improved Design with Upgraded Fuse Holder and Increased Wire Strands
  • Peak Power Rating: 2500 Watts
  • Includes Speaker Wire and Twisted Pair RCA Cables
  • Includes Installation Accessories and Wire Loom
SaleBestseller No. 13
TOPSTRONGGEAR 4 Gauge Amp Kit True 4 AWG Amplifier Installation Wiring Amp Kit Install Cables
  • 17 Feet 4 AWG 1862 Strands Ultra Flex Red CCA(Copper Clad Aluminum) Power Wire/3 Feet 4 AWG 1862 Strands Ultra Flex Black CCA Ground Wire
  • 18 Feet 16 AWG CCA Speaker Wire/18 Ft.- 18 Gauge blue Remote Turn-On Wire
  • One 17 Feet Black Bassik RCA Cable made from Oxygen Free Copper (OFC)
  • Heat Tested, Water Resistent InLine Fuse Holder/ 80 Amp ANL fuse
  • Connecting Terminals And Accessories Included
SaleBestseller No. 14
BOSS Audio Systems PV3700 5 Channel Car Amplifier – Phantom Series, 3700 Watts, Full Range, Class A-B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable, Remote Subwoofer Control
  • Power - 550 Watts Max x 4 @2-Ohms, 275 Watts Max x 4 @4-Ohms, 1100 Watts Max x 2 Bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
SaleBestseller No. 15
New Crunch PX-1000.4 4 Channel 1000 Watt Amp Car Stereo Amplifier + Wiring Kit
  • Crunch PX 1000.4 4 Channel Car Amplifier
  • Power:
  • 2 Ohms: 4 x 250 Watts
  • 4 Ohms: 4 x 125 Watts
  • Mono Bridged @ 4 Ohms: 2 x 5000 Watts